Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Fence Installation: The West Covina Owner’s Guide
Dvele fence installation in West Covina typically runs $3,500 to $9,000 installed, depending on the fence style, linear footage, and how much of the existing Dvele framework we can reuse. We stock Dvele-compatible fence panels, posts, and hardware on our trucks, so most installations are completed within one to two days once materials are confirmed on site. Homeowners usually discover the problem the same way: a section starts leaning after a windstorm, a gate won’t latch anymore, or the powder coating has bubbled and flaked off in patches across the sun-facing side. That’s the San Gabriel Valley sun doing what it does to coated steel and aluminum, and it’s the most common reason we get called out for fence work in this part of West Covina.
Which Dvele Models This Applies To
Dvele homes built across West Covina’s newer subdivisions, including the tracts near Galster Wilderness Park and south of the 10 freeway, shipped with factory-specified perimeter fencing that matches the home’s architectural package. Most of what we see falls into two buckets: horizontal aluminum slat fencing with hidden fasteners, and steel tube frame fencing with vertical slats. The identifying mark is usually stamped on the inside face of the post cap or along the bottom rail. If you can’t find a visible marking, measure the slat spacing: Dvele-spec horizontal slat fences almost always run 6-inch on-center spacing using 1-inch by 4-inch slats, while the vertical steel tube style runs 4-inch square posts at 8-foot intervals. That spacing difference matters because a generic fence panel from a big-box store won’t match the existing post centers, and you’ll be looking at weird half-slats at the corners. We order directly from Dvele-compatible suppliers or fabricate locally when a run is discontinued. And to be clear: Mason Remodeling Co West Covina is an independent contractor, not affiliated with Dvele, but we’ve installed and repaired enough of their fence systems around West Covina that the compatibility quirks are second nature at this point.
Styles & brands we work with
Signs Your Dvele Fence Installation Is Failing
- Leaning sections after no obvious impact. This is almost always a post footing issue, not a panel issue. In West Covina’s heavier clay soils near the hills, water pools around post bases during winter rains and slowly undermines the concrete. The fence stays intact but the post starts drifting.
- Gate that won’t latch or scrapes along the bottom rail. The gate hinge brackets on Dvele-spec fences are aluminum and they wear into an oval over time, especially on gates that face east-west sun exposure. The gate drops a quarter inch, then a half inch, and the latch no longer lines up.
- Powder coating bubbling on the sun-facing side. This is UV degradation. Dvele’s original coating was good, but ten-plus years of West Covina summer sun, particularly on fences with no shade from mature trees, breaks down the finish at the slat edges first. You’ll see flaking before you see rust.
- Rust streaks running down from fasteners. That tells us the fasteners were a mixed batch or the painted-over hardware didn’t get a proper seal. Water sits in the screw head, rust starts, and every rain sends a fresh orange streak down the panel face.
- Panels rattling in the wind. Loose channel clips or worn rubber gaskets inside the rail channels. It’s a small thing until a Santa Ana wind catches a panel at the wrong angle and rips it free.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Dvele fence installation in West Covina runs $3,500 to $9,000. The spread comes down to three things: linear footage (most Dvele lots we work on run 150 to 300 linear feet of perimeter fence), whether we’re reusing the existing posts or pouring new concrete footings, and whether the gate hardware needs full replacement. At the low end you’re looking at panel replacement on existing structurally sound posts with new fasteners and hardware. At the high end we’re pulling old posts, drilling new footings, and handling a full linear run plus a driveway gate. Every quote includes parts, labor, removal and haul-off of the old fence, and a written line-item price before work starts. That’s the Threshold Standard: no verbal estimate that grows, no surprise invoice at the end. You should know what you’re getting before we ever pick up a tool.
DIY or Call Us?
You can safely inspect your fence: look for rust at fasteners, check gate hinge wear, and mark any leaning sections with a level. You should not try to reset a leaning post on your own, especially if the fence is steel tube construction. A steel post with concrete attached is heavy and awkward, and if it falls while you’re working at the base, it can cause real injury. Same goes for any gate that’s still under spring tension: leave that alone and call us. If a section is leaning but stable, and you want to try a cosmetic fix on flaking powder coating, that’s your call, though it usually comes back within two years. Most West Covina homeowners we talk to would rather have the fence matched, installed, and warrantied once. That’s what we do. Call (707) 760-7579 for a free on-site inspection and a written quote.
FAQs
A properly installed Dvele fence in West Covina lasts 15 to 20 years before major work is needed. The powder coating usually needs touch-up or replacement at the 10 to 12-year mark because of sun exposure. Post footings can last longer than the panels, especially if the original pour was deep enough. Call (707) 760-7579 and we’ll tell you what your specific fence is looking at.
Yes, in most cases individual panels, posts, and gate hardware can be replaced without redoing the entire fence. The deciding factor is whether the existing posts are still plumb and the footing concrete is intact. We stock individual Dvele-compatible panels and hardware on our trucks, so we can usually repair a failing section in a single visit without making you wait on a special order. Call (707) 760-7579 and we’ll assess what actually needs to be replaced and what can stay.
A full Dvele fence installation in West Covina takes one to two days for a standard residential lot. If we’re reusing existing posts, it’s usually one day. If we’re drilling new concrete footings, that adds a day for the concrete to set before panels go on. We’ll give you a start date and a completion date in writing before any work begins.
We keep Dvele-compatible slats, rail channels, post caps, gate hinges, and latch hardware in our West Covina shop and on our trucks. For less common Dvele-spec pieces or custom lengths, we order from our fabricator and typically have materials within three to five business days. Call (707) 760-7579 and we’ll confirm on the first visit exactly what we have on the truck and what needs an order.
If your Dvele fence is leaning, flaking, or refusing to latch, call Mason Remodeling Co West Covina at (707) 760-7579. We’ll come out, take a look, and hand you a written price before anything gets started. You’ll also know exactly who’s coming to your door: their name, their photo, and their ID badge. That’s how we do every job in West Covina.
Written by Isaac Pruett, Owner, Mason Remodeling Co West Covina at Mason Remodeling Co West Covina, serving West Covina and nearby areas.
