Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Fence Installation: The West Covina Owner’s Guide
Jerith fence installation in West Covina typically runs $3,500 to $9,000 for a full aluminum fence project, with gate-only work starting lower and long runs with custom gates at the top of that range. We stock Jerith-compatible posts, pickets, rails, hinges, and latches on our trucks and can usually start within a few days of your first call to (707) 760-7579. Most West Covina homeowners discover a problem the same way: a gate that suddenly drags on the concrete, a post that’s leaning after a wet winter, or pickets that rattle loose because the original installer cut corners on brackets.
Jerith builds aluminum and steel residential fence systems, and the parts are specific: post sizes, picket spacing, and gate hardware are engineered to work together. When one piece fails, the failure usually starts small and gets worse fast, especially in West Covina’s clay-heavy soil that shifts with every rain cycle. Here’s what you need to know to get it fixed right the first time.
Which Jerith Models This Applies To
Jerith has been manufacturing aluminum fence panels since 1961, and their product lines generally fall into three groups: residential aluminum (the most common in West Covina backyards), commercial-grade aluminum, and ornamental steel. The biggest compatibility gotcha we see is homeowners buying a generic 2-inch post from a big-box store to replace a Jerith post, only to find the picket spacing and rail brackets don’t line up. Jerith posts are typically 2-inch or 2.5-inch square with a specific wall thickness, and the rails slide into punched holes, not surface-mounted brackets.
To identify your exact model, look for a label on the inside of a gate or on the bottom rail. If there’s no label, measure the post width and picket spacing (center to center). Jerith’s residential aluminum pickets are commonly 5/8 inch wide, set at roughly 4-inch spacing, but taller security panels and pool code versions differ. For OEM versus aftermarket, we’re direct with homeowners in West Covina: a genuine Jerith replacement part guarantees the fit, but a quality aftermarket post with the same dimensions and a powder-coat finish will hold up equally well for less money. We stock both and will tell you which makes sense for your situation.
Styles & brands we work with
Signs Your Jerith Fence Installation Is Failing
- Gate dragging on the ground or binding against the latch side. This is almost always a worn hinge or a post that’s started to lean because the concrete footing wasn’t set deep enough. In West Covina’s expansive clay soil, a shallow footing lifts and shifts with every heavy rain, and the gate is the first thing to show it.
- Pickets rattling or spinning in place. Jerith pickets are punched through rails and held with plastic or metal clips. Southern California sun breaks down plastic clips in five to seven years. Once the clips start failing, pickets work loose and the whole panel gets noisy and wobbly.
- Post leaning at the base with cracking concrete around the footing. This is a soil issue, not a post issue. West Covina’s soil expands when wet and contracts when dry. If the original post hole wasn’t dug below the active soil line, the post will eventually lean no matter how good the aluminum is.
- White chalky residue on black or bronze posts. That’s the powder coat oxidizing. Jerith’s factory finish is good, but after 10 to 15 years of San Gabriel Valley sun, the coating breaks down. It’s cosmetic at first, but once bare aluminum is exposed, pitting starts and the metal thins.
- Latch that won’t catch or a gate that blows open in Santa Ana winds. The latch mechanism Jerith uses is often a gravity or spring-loaded design. After years of slamming, the internal spring fails or the strike plate shifts. It’s a cheap fix if you catch it early, but left alone, the gate works against the hinges and post.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For full Jerith fence installation in West Covina, plan on $3,500 to $9,000, which covers removal of the failed section, new posts set in concrete below the active soil line, panels, gates, hardware, and a powder-coated finish to match your existing run. A single post replacement starts around $400 to $800 installed; replacing a gate with new hardware usually runs $600 to $1,800 depending on width and whether the post needs resetting at the same time.
What drives the price: linear footage, gate width and weight, whether we’re matching an existing powder coat color, and access. A fence line against a slope, or one where we can’t get a wheelbarrow to the post holes, costs more in labor. Every price we give in West Covina is a written line-item quote before work starts, so you see exactly what the parts cost and exactly what the labor costs. The work is covered by our 365-Day Done Right Promise: if anything we installed fails within a year of completion, we come back and fix it at no charge.
DIY or Call Us?
If your gate is dragging, check the hinge screws first. Sometimes they’ve just worked loose, and tightening them with a hex key buys you time. You can also check post plumb with a $10 level from Home Depot, and you can clean chalky powder coat with mild soap and water to see how much metal is actually exposed. Those checks are safe and smart.
What we’d rather you not do is dig out and reset a post yourself, especially a gate post. The hole needs to go two feet deep or more, the post needs to be perfectly plumb in two directions while concrete sets, and if you get it wrong, the gate hangs off-plumb and wears out the new hardware in months. Cutting Jerith panels to size without the right blade and jig leaves ragged edges and voids your powder coat. Call (707) 760-7579 and we’ll give you an honest written quote. You should know what you’re getting before we ever pick up a tool.
FAQs
A properly installed Jerith aluminum fence in West Covina lasts 20 to 30 years for the structure; the powder coat generally starts showing age at 10 to 15 years with our sun exposure and smog. The parts that fail first are the small plastic clips and gate hardware, which is why we stock replacements. If one section went down early, call (707) 760-7579 and we’ll tell you whether it’s worth repairing or replacing the run.
Yes, if the post itself isn’t bent or corroded, we can straighten and re-set it in a deeper concrete footing. The real fix is getting below the active soil line, which in West Covina usually means 24 to 30 inches deep. If the post is cracked or the powder coat has pitted through, replacement is the better-value call. Estimates are free.
A single post replacement takes half a day; a gate replacement takes two to three hours. A full backyard fence installation in West Covina, six to eight panels with gates, typically takes two to three working days, including concrete cure time. We’ll give you a schedule in writing before we start.
We stock Jerith-compatible posts, rails, pickets, hinges, latches, and clips on our trucks, which means most repairs in West Covina don’t wait on shipping. If your job needs a specific Jerith panel or custom gate, we order it direct and put that lead time in your written quote. Either way, you won’t be chasing parts.
For a free, written estimate on any Jerith fence installation in West Covina, call (707) 760-7579. A live person answers every call, any hour of any day, and we’ll schedule a time for one of our background-checked, uniformed technicians to come out, take measurements, and give you the price in writing before any work begins.
Written by Isaac Pruett, Owner, Mason Remodeling Co West Covina at Mason Remodeling Co West Covina, serving West Covina and nearby areas.
