Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Fence Installation: The West Covina Owner’s Guide
Ameristar fence installation in West Covina typically runs $3,500 to $9,000 for a full residential project. We install and repair Ameristar steel and ornamental fencing across West Covina, and we keep the most commonly requested components in stock or available in one to three days from our local suppliers. Most West Covina homeowners call us after a windstorm bent a gate, a vehicle clipped a panel, or a post finally rusted through at the base after years of sprinkler overspray.
Before you start pricing out work, know this: Mason Remodeling Co West Covina is an independent service provider. We are not affiliated with Ameristar. What we offer is experience with their product line, honest pricing on parts and labor, and a crew that shows up in uniform and tells you exactly what’s happening before the first cut. Isaac Pruett, our owner, grew up in Los Angeles and has been working fences, framing, and full remodels across the San Gabriel Valley for years. You should know what you’re getting before we ever pick up a tool.
Key Takeaways:
- Full Ameristar fence installation in West Covina: $3,500 to $9,000 installed.
- Repairs (sections, gates, posts) usually run $350 to $1,600 depending on what failed.
- We bring the right posts, panels, gate hardware, and fasteners for your existing Ameristar series, not whatever happens to be on the shelf.
- Every quote is written, itemized, and delivered before work starts. No verbal numbers that grow later.
- Every job is backed by our 365-Day Done Right Promise: if it’s not right within a year, we make it right at no cost.
Which Ameristar Models This Applies To
Ameristar builds a broad catalog, but in West Covina we see three lines on the vast majority of residential properties: the Echelon series (welded steel with a smooth, high-end look), the Montage series (stacked rail segments that give a clean, continuous top line), and the Spear Top aluminum fencing common around pools and side yards. The part you need depends on which one you have, and mixing the wrong component with the wrong series creates a fence that looks fine for a month and then creaks, sags, or fails at the joints.
The fastest identification method is the sticker. Most Ameristar panels and posts shipped in the last ten to fifteen years still carry a label on the top rail or inside the post cap with the series name and a product number. If the sticker is long gone, measure the post spacing and the panel height. Echelon and Montage panels in West Covina are most commonly 4, 5, or 6 feet tall with post widths of 2×2, 2.5×2.5, or 3×3 inches. Aluminum Spear Top panels typically sit at 4 or 5 feet and use powder-coated square posts with a very specific top finial thread pattern. One compatibility gotcha we see often: the Echelon rackable option (for sloped ground) and non-rackable panels are not interchangeable, even when the height and width match.
For Ameristar specifically, we recommend OEM panels and posts whenever the existing fence is still structurally sound and you’re matching a section. Aftermarket steel panels from big-box stores can be a hundred dollars cheaper per section, but the gauge is often lighter, the powder coat yellows faster in California sun, and the post brackets don’t always line up with the original mounting holes. If you have an older fence where the original color has faded, a quality aftermarket panel with a matched factory finish can actually blend better than a bright new OEM panel next to sun-bleached steel. We’ll go over both options and tell you which one holds up.
Styles & brands we work with
Signs Your Ameristar Fence Installation Is Failing
- Post lean or movement at the base. This is the number one failure in West Covina. Post bases sit in concrete, often poured too shallow, and years of clay soil expansion and irrigation will loosen them. If you can rock a post with one hand, the footing has failed and the panel weight will eventually pull the whole line.
- Gate drags or won’t latch. The gate frame itself is rarely the problem. What fails first is the hinge post, which takes enormous repetitive load. Once it leans a quarter inch, the latch no longer lines up and you’ll see the gap grow at the top of the gate.
- Rust bleeding from base caps and welds. Ameristar’s powder coating is strong, but a scratch from a mower or weed trimmer opens bare steel. Sprinkler water, especially the hard water common in West Covina, accelerates the rust through the scratch line. Small rust blooms are repairable; heavy scale means replacement.
- Loose or missing top rail screws. On Montage systems, the rails press together and the screws are the only mechanical lock. When they back out from vibration and temperature cycling, the rack sags and the whole section starts walking out of place.
- Rocking panels between posts. This usually means the internal brackets or mounting clips have worn down or snapped. On Spear Top aluminum especially, the small cast brackets can crack silently and leave the panel loose for months before it finally drops.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In West Covina, we price Ameristar fence installation between $3,500 and $9,000 for a complete residential yard, including tear-out and disposal of the old fence, new steel or aluminum posts set in proper concrete footings, panels, gate hardware, and a written warranty on our workmanship. Where your project lands within that range depends mostly on linear feet, the series you choose, gate count, and whether old concrete has to be broken out and hauled away.
| Project Scope | Typical Installed Price Range | What’s Included |
|---|---|---|
| Partial repair: 1-2 sections or a single gate | $350 – $1,600 | Materials, labor, post alignment or replacement, gate hardware reset |
| Full fence, 50-100 linear feet | $3,500 – $6,000 | Tear-out, new posts, panels, gates, concrete footings, haul-away |
| Full fence, 100-200 linear feet with 2+ gates | $5,500 – $9,000 | All above plus larger gate frames, possible stamped concrete or paver interface work |
You’ll get a line-item written price on every job, before any work begins. That means the panel cost, the concrete, the labor, and the haul-away are all listed separately, and the number we hand you is the number on the final invoice. No change orders because we “found something” unless you approve a written one first. Every install includes our 365-Day Done Right Promise: if the fence sags, the gate binds, or the posts shift within a year of completion, we come back and fix it at no charge.
DIY or Call Us?
Most West Covina homeowners can safely check a few things before calling us: find the model sticker on the top rail, measure your panel height and post spacing, and take a photo of the gate hardware from three feet back. That saves a trip and helps us bring the right parts the first time.
Where DIY goes wrong fast is the gate. A 6-foot steel gate is heavy, the springs and hinges are under tension, and a gate that comes off its post during a repair can send someone to urgent care. Post replacement is the other big one: digging out a failed footing, setting a new post in concrete that’s at least 18 inches deep, and getting it perfectly plumb while working around existing gas, water, and irrigation lines is a job for a crew that does it regularly. In West Covina, the local hard clay and sprinkler lines add layers of complication that you don’t see until you’re three feet down. If any part of the job involves a gate under load, a leaning post, or buried utilities, call (707) 760-7579 and we’ll handle it.
FAQs
A properly installed Ameristar steel fence with intact powder coating should last 20 to 30 years in the West Covina climate. The weak points are the post footings and gate hardware, which typically need attention within 10 to 15 years. Aluminum Spear Top fencing last anywhere from 15 to 25 years, with the anodized and powder-coated finishes fading slower than others. Call (707) 760-7579 if you’re not sure whether your fence has years left or months.
Yes, in most cases a single failed post, bent panel, or sagging gate section can be repaired without replacing the entire fence line. The deciding factor is whether the surrounding posts are still plumb, the concrete footings are intact, and the remaining panels are structurally sound. We’ll tell you plainly if patching is possible, and the written quote will show repair cost versus replacement cost so you can make an informed call. Estimates are free.
A standard 50 to 100 linear foot Ameristar fence installation in West Covina takes two to three working days, including tear-out, concrete setting, panel placement, and gate adjustment. Larger projects with multiple gates or challenging terrain can stretch to four or five days. We’ll give you a schedule in writing before work begins, and Isaac Pruett holds his crews to it.
We keep the most commonly needed Ameristar components in our West Covina inventory: gate hinges, latch assemblies, post caps, fasteners, and a selection of Echelon and Montage panel sections. Special-order items, including custom lengths or discontinued finishes, typically arrive within three to five business days through our local suppliers. We also carry components for KraftMaid, Cambria, and Silestone product lines if your home improvement project runs beyond fencing. Call (707) 760-7579 and we’ll check inventory while you’re on the line.
If your Ameristar fence is leaning, rusting, or the gate won’t close, we’ll put together a written estimate that shows exactly what it will cost and what you’re getting. Call (707) 760-7579 to schedule a free estimate. A live person answers every call, and the technician who shows up will arrive in uniform with a photo ID badge and a name you already know.
Written by Isaac Pruett, Owner, Mason Remodeling Co West Covina at Mason Remodeling Co West Covina, serving West Covina and nearby areas.
