Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CGI Kitchen Remodeling: The West Covina Owner’s Guide
If you own a home in West Covina with CGI cabinetry and you’re planning a kitchen remodel, the typical installed cost runs between $14,000 and $45,000, depending on whether we’re refreshing doors and hardware or gutting the entire space to the studs. Most homeowners call us after years of fighting soft-close hinges that no longer close, drawer glides that stick, or cabinet boxes that have swollen from years of humidity and dishwater steam. The good news is that CGI components are widely available, and we keep the most common replacement hardware on our trucks so we can match your existing setup without waiting on a special order.
Which CGI Models This Applies To
CGI cabinetry has been installed in hundreds of West Covina homes over the past two decades, and while the brand has gone through several line changes, the core construction remains consistent: framed cabinet boxes in 3/4-inch plywood or MDF, with doors in either thermofoil, laminate, or solid wood depending on the series. The three lines we see most often around West Covina are the CGI Essentials, CGI Select, and CGI Custom series. Here’s the compatibility gotcha: CGI changed their hinge boring pattern around 2011, so if your cabinets were installed before that, a new CGI hinge will not line up with the old mounting holes, and you’ll need either a retrofit plate or new doors. To identify what you have, pull a drawer and look for a white or gray sticker on the inside of the cabinet box. If it’s gone, measure the hinge cup diameter with a coin. A 35mm cup is the modern standard, and a 26mm cup means it’s the older run. For most West Covina kitchens, we recommend OEM hinges and glides for anything under warranty, and quality aftermarket equivalents like Blum or Salice for older kitchens where the OEM parts are discontinued and overpriced.
Styles & brands we work with
Signs Your CGI Kitchen Remodeling Is Failing
- Doors that won’t stay closed or slam shut. The soft-close damper inside the hinge has worn out. This is the single most common failure we see on CGI cabinets in West Covina homes, and it’s a $15 part that takes about 10 minutes per door to replace.
- Drawers that stick or drop on one side. The undermount glide has either bent or one of the clips has snapped. Once a glide bends, the drawer will never sit level again, and replacing the glide is the only real fix.
- Cabinet boxes that are swollen or dark at the bottom. This is water damage, usually from a slow sink leak that’s been dripping for months. In West Covina homes built before 1990, we see this because the original supply lines were never upgraded, and a pinhole leak in the wall takes down the cabinet box before you ever see water on the floor.
- Doors that have warped or peeled at the edges. If your CGI doors are thermofoil, the laminate layer eventually separates from the MDF core, especially on cabinet fronts near the dishwasher or range where heat and steam hit them daily.
- Adjustable shelves that sag in the middle. Shelf pins have worn the shelf pin holes wider over years of loading and unloading. On a full cabinet, that sag eventually cracks the shelf itself.
Replacement Cost & What’s Included
A full CGI kitchen remodel in West Covina runs between $14,000 and $45,000, and the spread comes down to scope. At the lower end, you’re looking at refacing existing boxes, replacing all hinges, glides, and drawer fronts, and installing new countertops. At the upper end, we’re tearing out everything, repairing any water damage behind the cabinets, and installing new CGI boxes, doors, countertops, and a full tile backsplash. Smaller jobs break out like this: cabinet installation alone runs $4,000 to $13,000, countertops from $2,000 to $6,500, and a backsplash from $800 to $2,500. Every one of our quotes is a written line-item price delivered before any work starts, so you’ll know exactly what the parts cost and what the labor costs. You should know what you’re getting before we ever pick up a tool.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Replacing a single hinge or a pair of door bumpers is something a careful homeowner can handle with a Phillips screwdriver and a level, and we’ll tell you that honestly. But the moment you’re dealing with cabinet boxes that have water damage, drawers that need new glides aligned across three mounting points, or anything involving countertop removal, you’re in territory where a small mistake becomes a structural problem. We’ve also seen DIY countertop pulls crack a backsplash or tear out an electrical outlet that wasn’t properly disconnected. If you’re not sure whether your CGI kitchen issue is a $15 part or a full box replacement, call us at (707) 760-7579 and we’ll talk you through what to look for before anyone schedules a visit.
FAQs
CGI cabinet boxes in West Covina homes typically last 15 to 25 years before they’re worth replacing, but hinges and glides usually fail between years 7 and 12. The dry Southern California climate works in your favor here, because humidity-related swelling that ruins cabinets on the coast is rarely a problem in West Covina. Call (707) 760-7579 if your cabinets are approaching that age and you want to know whether refacing or full replacement makes more financial sense.
Yes, hinges, glides, shelf pins, and door bumpers are all repairable, and we do those repairs for a fraction of what a full replacement costs. What generally cannot be repaired is a water-damaged box, because once the particle board or MDF swells, it never returns to its original shape or strength. Call (707) 760-7579 and describe what you’re seeing, and we’ll tell you over the phone which category you’re in.
A full CGI kitchen remodel in West Covina typically takes 4 to 8 weeks from demo to final walkthrough, with smaller jobs like a hinge-and-glide refresh done in a single day. We keep the schedule honest from the start, and if something is going to run longer, you’ll know before the crew shows up, not after. Call (707) 760-7579 for a written timeline on your specific scope.
We stock the most common CGI-compatible soft-close hinges, glide sets, and bumpers on our trucks, and we can source discontinued CGI hardware through our supplier network within a week in most cases. If your kitchen uses the pre-2011 26mm hinge bore, we’ll tell you upfront that parts need to be ordered, and we’ll give you the lead time before anyone starts work. Call (707) 760-7579 with your cabinet’s age and we’ll confirm what’s on hand.
Contact Mason Remodeling Co West Covina
If your CGI kitchen is failing or you’re ready to plan a full remodel in West Covina, call us at (707) 760-7579 to schedule a free estimate. We’ll send you the name and photo of your technician before they arrive, deliver a written price before any work starts, and stand behind everything with our 365-Day Done Right Promise. Isaac Pruett and the crew know West Covina kitchens, including the older builds near Eastland Center where cabinet retrofits get tricky. Call (707) 760-7579 today and get a straight answer.
Written by Isaac Pruett, Owner, Mason Remodeling Co West Covina at Mason Remodeling Co West Covina, serving West Covina and nearby areas.
