Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Home Additions & ADU: The West Covina Owner’s Guide
Most West Covina homeowners call us when a KraftMaid cabinet hinge, drawer glide, or door front in an addition or ADU has failed and they can’t find the exact match locally. We stock common KraftMaid parts on the truck and can order series-specific components directly, with most swaps done in a single visit. Installed repair costs for KraftMaid parts in West Covina additions and ADUs typically run $150 to $750 depending on the component, while full KraftMaid cabinet installations in new additions or ADU kitchens range from $4,000 to $13,000. If you’re mid-project or living with a cabinet door that won’t close right, here’s what to know before you touch anything.
The usual discovery happens one of three ways: a hinge snaps and the door droops, a drawer glide gives out and the drawer binds or falls, or a door front warps from the dry heat we get in the San Gabriel Valley. None of these are cosmetic when they happen in an ADU you’re renting out or a kitchen addition you just paid for. The good news is KraftMaid parts are identifiable, orderable, and replaceable without tearing out the cabinet box.
Which KraftMaid Models This Applies To
KraftMaid has shifted its cabinet lines several times over the years, and the part you need depends on which series you have. The older KraftMaid Venicia line used a frameless European-style construction with metric hardware, while the more common KraftMaid standard framed cabinets use imperial measurements and a different hinge cup size. If your cabinet boxes have a face frame (the visible wood border around the opening), you’re in the standard lineup. If they’re flat-fronted with no frame, you likely have Venicia or a later frameless series.
The fastest way to identify your part is to look for a small white or silver sticker on the inside of the cabinet box or the back of the drawer. It’ll show the cabinet’s manufacturing code and sometimes the finish name. If the sticker is gone, measure the hinge cup diameter: standard KraftMaid concealed hinges use a 35mm cup, while some older series used 26mm. That single measurement eliminates half the wrong parts people order online. For drawer glides, note whether it’s a side-mount (visible on the drawer side) or undermount (hidden under the drawer). KraftMaid transitioned to undermount glides about a decade ago, and the two are not interchangeable without drilling new holes.
On the OEM-versus-aftermarket question: for hinges and glides, genuine KraftMaid parts (made by Blum or Salice depending on the era) are worth the small premium because the screw pattern and soft-close mechanism match without modification. For cabinet doors, drawer fronts, and trim pieces, a well-built aftermarket replacement from a local cabinet shop in West Covina often matches finish and grain better than a new OEM door, especially if your original finish has aged or been discontinued. We stock Blum and Salice replacement hardware on the truck, since those cover the overwhelming majority of KraftMaid cabinets installed in Southern California homes from the mid-1990s onward.
Styles & brands we work with
Signs Your KraftMaid Home Additions & ADU Is Failing
- A door sags or won’t line up with its neighbor. The hinge has worn or the screw holes have stripped out. In West Covina’s dry summers, wood fibers shrink and stripped holes get looser faster than in coastal climates.
- A drawer sticks halfway or drops on one side. The glide’s ball bearings or nylon rollers are shot. This is the most common failure we see in ADU kitchens, because renters open drawers with more force than the original owner ever did.
- Soft-close stopped soft-closing. The damper inside the hinge or glide has failed. It doesn’t affect function, but once one goes, the others in the same run usually follow within a year.
- You hear a creak or a snap when opening. That snap is often the hinge clip losing tension against the mounting plate. A creak usually means a dry hinge with enamel-on-metal wear.
- The door front has visible warping or the laminate is peeling at the edge. Heat exposure, especially near a west-facing window in an addition without sufficient ventilation, causes laminate to delaminate. Once peeling starts, no amount of clamping will truly fix it.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what KraftMaid parts work runs in West Covina right now:
- Hinge replacement (per hinge): $25 – $60 installed, including the part. Most doors need two hinges; we replace both even if one looks fine.
- Drawer glide replacement (per drawer): $60 – $140 installed, including undermount or side-mount glides rated for the drawer’s weight.
- Door front replacement (per door): $180 – $450 installed, depending on size, finish matching, and whether we order OEM or have a local shop build a matched door.
- Full KraftMaid cabinet installation in a new addition or ADU kitchen: $4,000 – $13,000 depending on linear footage, cabinet count, and finish tier.
The range comes down to part type, accessibility, and finish matching. A hinge swap on a base cabinet with clear access is a 15-minute job. A drawer glide replacement on a corner cabinet with plumbing in the way takes longer. We price every repair with the part and labor separated, so you see exactly what you’re paying for. Every KraftMaid part we install carries a one-year workmanship warranty, and if something isn’t right within 365 days, we come back and make it right at no charge.
DIY or Call Us?
You can safely check a few things before calling. Look for the sticker inside the cabinet box, note whether the hinge cup measures 35mm or 26mm, and count how many doors or drawers show the same symptom. If the issue is one loose screw, tightening it with a hand screwdriver (not a drill) often solves it. Don’t reach for wood glue and toothpicks unless you’ve done this before; a stripped hinge hole that’s badly patched makes the next repair more expensive.
Drawer glides and hinges on KraftMaid cabinets are not dangerous, but they are precise. A glide mounted 1/16 inch off level makes the drawer bind, and a hinge clip forced into the wrong position will crack the mounting plate. If the cabinet is in an ADU you’re renting, remember that a repair that looks fine today but fails in three months costs you a tenant call. Call us at (707) 760-7579 and we’ll identify the part, quote the repair in writing, and get it handled.
FAQs
Hinges and glides on KraftMaid cabinets typically last 10 to 20 years in West Covina’s dry climate, but heavily used drawers in rental ADUs often need new glides around the 8-year mark. The damper mechanisms in soft-close hardware fail first, usually within 7 to 10 years.
No, and honestly, repair attempts on most KraftMaid hardware are not worth your time. Once a hinge’s internal spring or damper fails, or a glide’s ball bearings wear flat, the part is done. Replacing it with the correct part restores full function for less cost than any rebuild.
Most single-door or single-drawer repairs take under an hour on site. If we’re replacing parts across a full cabinet run or matching door fronts, plan for half a day. We always confirm the timeline in the written quote before we start.
We stock common 35mm concealed hinges, undermount and side-mount glides, and mounting plates on the truck. Series-specific door fronts, decorative hardware, and odd-size components are ordered and typically arrive within a week. If you’re also working with Cambria, Silestone, or Kohler products in the same addition or ADU, we can coordinate those orders through our material partnerships.
Hinge replacements run $25 – $60 per hinge installed, drawer glides run $60 – $140 per drawer installed, and door front replacements run $180 – $450 per door installed. Call (707) 760-7579 for an exact quote, and we’ll put it in writing before any work starts.
Written by Isaac Pruett, Owner, Mason Remodeling Co West Covina at Mason Remodeling Co West Covina, serving West Covina and nearby areas.
